A New Magazine for the Ruger 10/22 – The High Tower Armory RM-25
Ah, the Ruger 10/22. The first firearm for many shooters and a perennial favorite used for everything from plinking to small game hunting and, in some cases, military applications. With over 5 million built in the past 50+ years, over a dozen factory variants, many more dealer exclusive variants, and hundreds – if not thousands – of aftermarket accessories available, to say that the 10/22 is popular would be quite the understatement.
It could be that one of the reasons for the Ruger’s popularity over some other .22 semi-auto rifles is its reliability, due in part to its famous rotary magazine. Despite his feelings on so-called “high capacity” magazines, the late Bill Ruger did a pretty good job with this rifle and its feed system. The only problem with it is that, perhaps to Bill’s satisfaction, it only held 10 rounds.
To solve that reduced-capacity magazine issue, a number of aftermarket magazines have popped up over the past few decades with varying degrees of success. Some degrees lower than others, in my experience (yes, I’m talking about you, BC Hot Lips and Eagle). Thankfully, the folks out at High Tower Armory (HTA) in Minnesota seem to have done a good thing with their new RM-25 magazine.
The RM-25 appears to be the solution to the reduced-capacity problem of the standard factory magazine and the reliability issues with some aftermarket offerings. And while, yes, Ruger may have abandoned their namesake’s ideology and produced higher capacity BX-series magazines, HTA didn’t stop there – they also brought some welcome additions to the table. Continue reading
Bigfoot Gun Belt Goes Beyond Just Holding Up Your Trousers
Why You Need a Good Gun Belt, and Why Your Current Belt Probably Isn’t It
One of the most important pieces of your CCW loadout might not be what some would expect. Finding a firearm that is reliable, accurate, easy to carry, and easy to use under stress is paramount. The number two spot on this list is often contested between a good holster and a good belt, the importance of which is difficult to understate. Speaking with someone who carries a firearm regularly, whether for work or for general self defense, will confirm that one of the most important pieces of your CCW loadout is a good belt.
A CCW holster has a lot of responsibilities, including being comfortable, effectively concealing the firearm, keeping the firearm in the right position and angle where you put it, and keeping the firearm securely holstered unless and until you intentionally draw it. But what keeps that holster where you put it and allows it to do its job? As important as the holster may be, the belt from which you hang it is just as vital. The important thing to realize is that the belt and the holster work together to comprise the overall carry system that you use.
Like many people who carry, Team GunLink has amassed a box-o-holsters through the trial and error process of finding the couple of holsters that work well and see regular use. No matter how good those holsters are, without a good belt, they will have issues. As such, CCW-ers may find themselves either going through a similar trial and error process with their belt or just dealing with those issues – which can lead to giving up on carrying a gun. I personally went from using a standard web belt to a Dickies work belt, which I used for ages, using “fashion belts” for dressier work and toying with the idea of springing for a spendy double-thick gun belt before finally finding Bigfoot Gun Belts. Continue reading
Girls with Guns Unveils New Hunting Gear at SHOT
Chances are if you are a female interested in the outdoors, hunting, or shooting, you have heard of Girls With Guns (GWG). GWG started in 2008 with apparel designed to be fashionable while still allowing a young woman to wear camouflage to the store. From humble beginnings in a garage, GWG started out designing and embroidering their own hats and now their items can be found in national chains such as Cabela’s and Dick’s.
Norissa Harman and Jen Adams are two friends who are young, fashionable, and avid hunters. They grew tired of having to wear small men’s, and probably large boy’s, clothing while hunting. When you are out in the field hunting, ill-fitting clothes can cause many problems, such as exposed skin, being noisy, and restricted movement. They eventually expanded their clothing line to include hunting clothes, designed by women for women. Continue reading
Glock Factory Service: The Best Kept Secret in Sights?
It’s no secret that Glock’s factory sights might not exactly be the best in the business. Pistol shooters may find a variety of faults with the sights, from the polymer material from which they are constructed to the otherwise unconventional “ball in the bucket” markings versus more traditional 3-dot sights to the dimensions of the stock sights. Whatever it is, enough people dislike them to make the field of aftermarket sights a relatively large one.
One of the main concerns heard most frequently seems to be about the durability of the polymer sights. Some damage to the side of a Glock rear sight is visible in our Armed Citizen graphic. A stock front post on one of the GunLink Glocks was starting to wear on one corner and mushroom on the other corner from being drawn and reholstered. One of our shooting buddies told us about a Glock that took an unlucky hit to the rear sight after dropping a few inches onto an end table and the sight snapped out. Other stories of sight failure can be easily found if you scrounge around online.
To be certain, the polymer OEM Glock sights are not complete garbage and, truthfully, might be just fine for the majority of casual shooters. Although they don’t make a habit of regularly releasing their numbers, Glock production hit the 5-million mark eight years ago in 2007. If the last eight years kept pace with the previous 8-year period, the numbers are now somewhere around 8 million. The majority of those pistols’ owners probably don’t spend a lot of time using them hard enough to cause any notable damage. Continue reading
GunLink Visits the Home of Black Nitride, AR Components
Checking Out the Operations at H&M and Rubber City Armory
If you have been keeping up with our weekly posts about what’s new at Brownells, you may remember a recent one in which Paul Levy told us about the low mass AR-15 bolt carrier group from Rubber City Armory (RCA). This caught my attention since Rubber City is the nickname of a certain Ohio city from whence one of the GunLink team members originally came and it just so happens that we get back there to visit every so often.
I reached out to RCA and who else is on the other end than Chris Cerino himself – 2nd place finisher on History Channel’s Top Shot Season 1 and Top Shot All Stars, Gun Talk TV field host, and firearms instructor. Add to that list Director of Operations for Rubber City Armory, a subsidiary of H&M Metal Processing – the home of Black Nitride™. After exchanging a few communiques, we arranged to stop by and check out their operation on an upcoming trip to the area.
The GunLink team arrived on the day of our visit and, wouldn’t you know it, Chris had bailed. Can you believe the nerve of this guy? Only kidding – Chris was attending to the higher priority of kicking ass and taking names at the Blue Ridge Mountain 3-Gun Championship. Despite the lack of television personalities accompanying us, our awesome hosts Shade and Pete gave us the grand tour and showed us around both the H&M and RCA sides of the equation. Continue reading
Tedder Industries Launches Bigfoot Gun Belts Line
New Steel-Core Leather CCW Belts From Under the Same Umbrella as Popular Holsters
Bigfoot Gun Belts, a breakthrough company that specializes in making the world’s strongest and most reliable gun belts, is proud to release their highly anticipated Untamed Series to the open and concealed carry world. These premium leather gun belts exude quality and comfort, while providing superior support to your everyday IWB and OWB carry.
Never deal with a sagging holster ever again!
Bigfoot Gun Belts are made with a double layering of English Bridle leather, which is cut to order by a handful of skilled gun belt craftsmen. This drum dyed leather, available in traditional black or rich brown, has been chosen for its legendary strength and long lifetime.
To provide even more strength to this beast of a gun belt, craftsmen at Bigfoot Gun Belts have embedded a spring steel core between the two layers of rich leather. The steel core, available in both the 14-ounce and 18-ounce leather belts, provides handgun owners with a strength rarely seen before (perhaps only from a distance with a shaky camera).
Each of our gun belts go through a Triple Edge Finishing process, which includes a bevel, burnish, and paint done by the industries finest gun belt makers. This creates a smooth and uniform finish and also provides protection to the edges of your gun belt.
To match the strength and quality of the hand cut leather, Bigfoot Gun Belts are made with corrosion resistant hardware that will stand up to the harsh elements. The nickel-plated roller buckle will also allow the belt to effortlessly ‘roll’ through your buckle without damaging the leather, while the snaps provide you with an easy way to swap out your belt buckle within seconds.
Every Bigfoot Gun Belt is backed by our 7-Day Test Drive and Legendary Warranty. This provides you with a chance to test it out with your CCW for a full week with absolutely no risk. If you’re not fully satisfied by this beast of a belt, send it back for a full refund.
Capture the strongest gun belt in existence starting at $54.88 at GunBelts.com Continue reading
